Acnodes KDM 7178 Manuel d'utilisateur télécharger pdf (Page 48)

series

User’

Manual

3. Hotkey

You can also conveniently command KVM switch by switching ports through

simple key sequences. The default hot key is SCROLL LOCK and the user

could change hot key as your convenient application. If you prefer to use some

hot key, please go to OSD menu and change the default hot key to the other.

To send commands to KVM switch, the SCROLL LOCK key must be pressed

twice within 2 seconds. You will hear a beep for confirmation and the keyboard is

in Hotkey mode. Then you have to enter Command in 2 seconds. If you have

not pressed any key during Hotkey mode over 2 seconds the Hotkey mode will

be escaped and back to Operation System control state.

A Command should be issued in Hotkey mode in 2 seconds.

Scroll

Lock

Scroll

Lock

Space Bar

Figure 4-1. Hotkey

Command Function

Space bar Active OSD

Previous Channel

Next Channel

[1.2,…,8] bank,

[01,02,…,16] port

First digit bank number start with 1

Second and third digits port number start with

“01”

PgUp Previous bank

PgDn Next bank

“B” Turn on / off beeper

“S” Auto Scan

“U” Console Security “ON” to “OFF”

“P” User logout / login

“R” OSD setting back to factory default value

“L” Turn on / off power saving

Table 3-1. Hotkey

1 2 ... 43 44 45 46 47 48 49 50 51 52 53 ... 60 61

Pas de commentaire

Acnodes KDM 7178 Manuel d'utilisateur Page 48