Acnodes FPC 8759 Manuel d'utilisateur télécharger pdf (Page 31)

CMOS Operation Mode

CMOS Reset

To clear the CMOS,

1. Remove the power cable from the system.

2. Open the system, and set the ‘CMOS Operation jumper’ from ‘CMOS Normal’

to ‘CMOS Reset’. (refer to the jumper shown below)

3. Connect the power cable to the system, and power on the system:

in ATX mode: press the power button and it will fail power on

in AT mode: turn on system power

4. Remove the power cable from the system.

5. Return the "CMOS Operation mode" jumper setting from "CMOS Reset" to

"CMOS normal".

6. Connect the power cable and power on the system.

Function

JP1

▲CMOS Normal

CMOS Reset

▲ = Manufacturer Default Setting

1 2 ... 26 27 28 29 30 31 32 33 34 35 36 ... 51 52

Pas de commentaire

Acnodes FPC 8759 Manuel d'utilisateur Page 31