Acnodes FPC 5105 Manuel d'utilisateur télécharger pdf (Page 44)

4.2 Touch Screen

The FPC5105 uses the 5-wire analog resistve. There are the specification and driver

installation which are listed below.

4.2.1 Specification

Touch Screen

5-wire Analog Resistive type

Touch Screen Controller

PenMount 6000 USB Touch Screen Controller IC

Communications

USB interface

Baud Rate

19200 baud rate fixed

Resolution

800 x 600 (10 bit A/D converter inside)

Power Input

Power Consumption

Active: 24.6mA / Idle Mode: 13.4mA

4.2.2 Driver Installation- Windows 7

The FPC5105 provides a touch screen driver that users can install it under the operating

system Windows 7. To facilitate installation of the touch screen driver, you should read the

instructions in this chapter carefully before you attempt installation.

1. Insert Driver CD and follow the path to select the “\Drivers\Step 5 - Touch”.

2. Follow the installing procedure and press OK.

1 2 ... 39 40 41 42 43 44 45 46 47

Pas de commentaire

Acnodes FPC 5105 Manuel d'utilisateur Page 44