Acnodes RMC 7155 Manuel d'utilisateur télécharger pdf (Page 10)

RMC 7155

14” short depth server

are subject to change without notice. For latest product information,

please visit Acnodes’ web site at www.acnodes.com.

14628 Central Blvd,

Chino, CA91710

tel:909.597.7588, fax:909.597.1939

Installing the Rack Rails

Determine where you want to place the RMC 7155 in the rack (see Rack and Server Precautions in Section 2-3). Position the

chassis rail guides at the desired location in the rack, keeping the sliding rail guide facing the inside of the rack. Screw the

assembly securely to the rack using the brackets provided. Attach the other assembly to the other side of the rack, making

sure that both are at the exact same height and with the rail guides facing inward.

Installing the Server into the Rack

You should now have rails attached to both the chassis and the rack unit. The next step is to install the server into the rack. Do

this by lining up the rear of the chassis rails with the front of the rack rails. Slide the chassis rails into the rack rails, keeping

the pressure even on both sides (you may have to depress the locking tabs when inserting). See Figure 2-2.

When the server has been pushed completely into the rack, you should hear the locking tabs "click".

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 66 67

Pas de commentaire

Acnodes RMC 7155 Manuel d'utilisateur Page 10